AB Water Advisory QQ: 12736688 
 Common name or trade name chemicals: AB water or PU glue. Mainly used, hand model, or the production of mold species. Hand model is a quick copy material. The low shrinkage, fast curing, easy to grind. Advisory QQ: 12736688 
 I. Model: 8012AB water, 8013AB water, 8014AB water, 8015AB water, 8017AB water. 
 Second, the use 
 (1) Measurement 
 A liquid, B liquid mixed with all the weight ratio: 1:1. Using paper cups or other containers, said first A proper amount of liquid, and then use another paper or other container weighed with the weight of liquid B. Please accurate weighing , A quantity of liquid and B liquid consistency. If the weight deviation is too large, may cause the surface can not be completely cured cure \, or the color of cured deviations occur. 
 (2) Mixed 
 The main method is accurate to say the B liquid into the A solution, and then use the metal spatula or glass rod to mix. If mixing uneven surfaces may cause can not be completely cured cure \, or to place the color of cured deviation. Note: mixing time of 10 ~ 20 seconds is appropriate, because of A liquid and B liquid mixture in the 1.5 to 2 minutes, curing, so the sooner the better hours of operation. 
 (3) irrigation mode 
 , Stir, and rapidly poured into the silicone mold, a vacuum machine, vacuum machine can be deprived of the liquid into the water and air, vacuum can be obtained after the contraction of the small, nonporous beautiful products. 
 (4) Stripping 
 After vacuum extraction was complete, the irrigation water, silicone mold a good place AB plane table, to be 10 to 20 minutes, you can mold release, the curing reaction heat curing temperature will rise, please note that to avoid scalding accidents, if too early ejection, due to the chilling temperature of curing may be deformed. 
 Third, Caution 
 (1) water vapor on the A \ B the quality of the second solution will have a negative impact, it should definitely be avoided mixed with water. 
 (2) B solution and the water react to form a white precipitate or during curing, should have become opaque, or have been cured, do not re-use. 
 (3) After use, be sure to cover the container well, dry in the shade to avoid direct sunlight saved.